Healthy Pets View Cart Healthy Pets Facebook Healthy Pets Twitter
Open the Accessibility Menu
go to top icon
  • Product ImageProduct Image
  • Product ImageProduct Image
  • Product ImageProduct Image
  • Product ImageProduct Image
  • Product ImageProduct Image
  • Product ImageProduct Image
  • Product ImageProduct Image

Andis Trim 'N Go Cordless Trimmer - Silver/Black

Item: BTB22965
Availability: In Stock
Was: $28.99$23.60You Save: $5.39!(19%)


Andis Trim 'N Go Cordless Trimmer has an ergonomic lightweight design for the ultimate in comfort. Andis warrants its products to the original purchaser against defective material or workmanship for one year from the date of purchase. All implied warranties are also limited to one year. Andis will replace the product without cost to the consumer.

Key Benefits

  • Great for trimming and light touch-ups on small and large animals
  • Compact trimmer is ideal for grooming maintenance on areas such as face, ears and pads
  • Runs quietly and smoothly so animals stay calm
  • Black soft grip lower body aids in control
  • Small size easily fits into your pocket for on the spot grooming
  • Cordless feature makes it easy to use anywhere
  • Operates on 1 "AA" battery (not included)

Useful Information

Important Safeguards:

When sing an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using this Andis trimmer.


To reduce the risk of electric shock:

  1. Do not reach for an appliance that has fallen into water.
  2. Do not use while bathing or in a shower
  3. Do not place or store appliance where it can fall or be pulled into a tub or sink. DO not place in, or drop into, water or other liquid.


To reduce the risk of burns, fire, electric shock or injury to persons:

  1. Close supervision is necessary when this appliance is used by, on or near children or individuals with certain disabilities.
  2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.
  3. Never operate this appliance if it is damage, if it is not working properly, if it has been dropped, or dropped into water. Return the appliance to an Andis authorized service station for examination.
  4. Do not use this appliance with a damaged or broken blade or comb, as injury to the skin may occur.
  5. Do no use immerse trimmer in water. Use a soft bristled brush to remove any hair from blade.
  6. Caution: Dispose of used battery properly. Do not incinerate; battery may explode if overheated.

Operating Instructions

Using Attachment Combs

(Not all models come with attachment combs)

You can set the blades for a coarser cut by attaching any of the snap on blade attachment combs made for your Andis trimmer. The blade attachments mount easily. To use a blade attachment, slip the cutter blade teeth into blade attachment. Snap the blade attachment down; it will snap on and off easily (Figure A). Combs help guide hair to cutting blades and give you precise control of hair lengths.


your trimmer uses one "AA" battery (not included). To insert battery, remove battery cover on back of unit. Insert battery as shown (Figure B).

User Maintenance

The internal mechanism of your trimmer has been permanently lubricated at the factory. Other than the recommended maintenance described in this manual, no other maintenance should be performed, except by Andis Company or an Andis authorized service station. To find Andis authorized service station near you log on to or contact our customer service department at 1-800-558-9441


When trimming is complete, slide on/off switch to off position and remove the attachment comb (if being used). Lightly brush out blades with the blade cleaning brush provided. For best results put a drop of Andis clipper oil on the blade when necessary. Blades should be handled carefully and never used to cut dirty or abrasive material.

Proper Battery Disposal

Batteries may contain heavy metals such as mercury, lead, cadmium, nickel and lithium, which can be harmful to the environment when improperly disposed of. Remove dead battery from the unit and dispose of properly. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials (or call 1-800-822-8837) for details in our area for recycling options or proper disposal.


Never handle your Andis trimmer while you are operating a water faucet and never hold your trimmer under a water faucet or in water. There is danger of electrical shock and damage to your clipper. ANDIS COMPANY will not be responsible in case of injury due to this carelessness


Knowing the difference between these two blades is essential when trimming hair. A T-blade's curved edges enable easy handling and better access for trimming around the ears, back of neck, beards and moustaches and cutting designs into the hair. For everything else and general shaving, a square blade is the perfect tool.
UltraEdge® blades are long-lasting and dependable. These blades undergo a special hardening process and are finished in chrome to resist corrosion and keep them sharp. CeramicEdge® blades are the pinnacle of blade technology a high tech zirconium oxide ceramic cutting blade means they run cooler than steel and stay sharper longer. CeramicEdge blades are perfect for the hair professional who does a high volume of clipper cuts.
We suggest only using Andis manufactured blades on your Andis tool; they are designed and engineered specifically for that model to achieve optimum cutting performance.
The documentation that came with your clipper or trimmer will reference your blade's item number. If you cannot find it you can search by your tool's item number, model number or name on the Andis Blade Finder.
In the Andis detachable blade line there are several blade sizes that overlap between animal and human use. However, blades used to groom an animal coat should never be used on a human.
Caring for your blades is essential in maintaining their longevity and cutting performance. Blades should be oiled after each use. If your clipper blades leave streaks or slow down, it is a sure sign they need to be oiled. Start by turning off the clipper and removing fragments of hair from the blade with a clipper brush. Clean and disinfect blades by using CoolCare Plus. Use the 5-point oiling system to lubricate your clipper and keep it running at top performance: 3 drops across the teeth of the blade and 1 drop on each back rail. After oiling, turn on and let run for 5-10 seconds to disperse the oil. Turn off and then wipe off any excess oil.
We recommend storing your blades in a low moisture environment to avoid corrosion. A padded blade storage case or pouch will help keep them safe and keep them from getting chipped or dropped which can break them or knock them out of alignment.
Blades are made of metal and oiling them will help reduce corrosion. Since the two metal blades rub against each other during operation, oiling them will also reduce friction thereby delivering better cutting performance. Oiling your blades regularly after each use is an important part ensuring your tool will cut and perform as designed.
We strongly recommend you use Andis Company clipper oil which is specially formulated for Andis clippers and trimmers. However, other clipper blade oils will also work.
We recommend that you oil your blades before and after each use. If your clipper blades leave streaks or slow down, those are signs that they need to be oiled.
Yes, most Andis clipper blades can be sharpened at our factory repair center or at Andis Authorized Service Stations. However, because of the length of the teeth on trimmer blades we do not recommend that these be sharpened. Find a service center near you.
Blades can be purchased on our website or through your local beauty supply store.
The lifetime of a blade depends on how often you use it and how regularly you clean and oil the blade. With proper maintenance your Andis clipper or trimmer blade can last quite a while before replacement.

Customer Q&A